+86-755-21539034
Touch The FutureContact Us
Shenzhen TitanFlying Technology Co., Ltd.
Racing Drone Flight Controller OMNIBUS F4 OSD

Racing Drone Flight Controller OMNIBUS F4 OSD

Current and voltage sensors
Super-Fast Operating Speed
Built-in BEC & OSD
Full carbon fiber made
Small(er) Size
  • Racing Drone Flight Controller OMNIBUS F4 OSD
  • Product Description
  • Specification

F4 Flight Controller

This version of the Flip32 AIO uses improved components and design that will properly limit the voltage to the Mini OSD preventing voltage spike and damage to the OSD.

Features of Racing Drone Flight Controller :

• STM103 MCU runs Cleanflight firmware
• 8PWM output, supports Octocopter
• MS5611 Barometer
• Only 35x35mm, mount holes 30x30mm
• Onboard USB (for config the OSD and FC)
• 5V 3A UBEC (2-6S)
• OSD hardware, Compatible with MinimOSD/MWOSD/CC3D OSD
• Small PDB
• Current and voltage sensors
• Better OSD Chip used with less power consumption
• 2x Software serial, 2x Hardware serial ports

Small(er) Size
With the incredibly small size, it can be mounted onto the
more mini-sized airframe (i.e. 130mm or below) and also
features all the functions that regular FC for FPV(s) has.
DShot 150/300/600/1200

Modes Supported
Besides the regular PWM mode,
Oneshot125/Oneshot42/Multishot modes,
the latest DShot150/300/600 modes are
also supported.

Super-Fast Operating Speed
The STM32F405 MCU which features the powerful
computing capacity and super-fast operating speed can
support the PID controller with higher cyclic frequency &
the gyro with higher refresh rate.
Built-in BEC & OSD
The built-in BEC (5V/1.5A) can provide
power for various electronic devices;
the internal OSD allows users to adjust
or set all OSD parameters via the
Betaflight/Cleanflight software easily.
Betaflight/Cleanflight Firmware Supported
The flight controller supports the Betaflight/Cleanflight firmware and allows users
to adjust or set various parameters via the Betaflight/Cleanflight software easily.
It's more applicable to the FPV flight & racing.
Compatible with 4in1 ESC
When pairing the Nano Flight Controller F4 with the 4in1 ESC,
the wiring & installation can be very simple and easy.


Basic Features

Compatible with (Multirotors)

Hexacopters

Multi-rotor Type

Quadcopters

FC Programming

Supported

Compatible with (Modes)

PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,
Dshot600, Dshot1200, Proshot1000

Compatible with (Transmitters)

PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL

OSD

Built-in

Voltage Monitoring

Supported

Current Monitoring

Supported

External Buzzer

Supported

LED Control

Supported

BEC


5V @ 1.5A

USB Port

MicroUSB

Size

27x27mm

Weight

3.3g

Applications

130&below FPVs

Hot Products
  • FPV ESC

    FPV ESC

    January 24, 2018An electronic speed control or ESC is an electronic circuit that controls and regulates the speed of an electric motor. It may also provide reversing of the motor and dynamic braking. Miniature electr...view
  • AG Drone T1-16L

    AG Drone T1-16L

    January 24, 2018T1-16L has all functions of T1-10L, and it equips water tank with larger capacity. It has the following advantages.1) EfficientTTF spraying drones 16L are with much longer drone width, and much bigger...view
  • Industry drone T2

    Industry drone T2

    January 24, 2018T2—Industrial Unmanned Aerial Vehicle(UAV)T2 professional heavy payload drone is an upgraded and multi-function drone with various payloads and of high security. Featuring standard “plug-in design,...view

Leave us Message

  • TEL:+86-755-21539034
  • FAX:0086-755-86181421
  • EMAIL:info@titanflying.com
  • ADDRESS:NO.15 Chaoyang road, Yanluo street, Songgang town, Baoan District, Shenzhen